How To Remove Key Lock From Door
Whether you want to supplant a lock altogether or you need to remove a lock to make a repair, removing a residential door lock is something you tin easily practice yourself. With the right tools in manus and clear instructions, removing a door lock is an like shooting fish in a barrel DIY job. Read on to learn how to remove the knob, cylinder, and mortise locks.
Removing a Knob Door Lock (With or Without Visible Screws)
A knob door lock refers to a door plow-knob that has the lock built right in. Most commonly, these are found on interior doors within a abode.
Sometimes, knob door locks volition too be used (along with a deadbolt) for an exterior door, but they are not recommended as the chief lock for any exterior door due to how easily they tin be removed or forced.
Tools Needed
To remove your knob door lock, you'll need to get-go by making sure you have the right tools for the job:
- Wire or small blast
- Flat-head screwdriver
- Phillips-caput screwdriver
Removing a Doorknob with Visible Screws
The first step is determining whether your doorknob has visible screws on the rose plate. If it does take exposed screws, these should be on the interior knob (the i you use to lock the door).
Step 1: Remove These Screws
If your doorknob has visible screws, your job will exist easy. Grab the Phillips-caput screwdriver and start unscrewing the two visible screws.
Footstep 2: Remove the Doorknobs
One time you've unscrewed those screws, you should be able to simply remove the interior and exterior doorknobs.
Step 3: Unscrew the Face up Plate
Pick up the Phillips-caput screwdriver once again and showtime unscrewing the 2 screws located on the faceplate.
Step four: Remove the Latch
Once you lot've removed the screws from the faceplate, simply grab the latch and pull the entire thing out.
Removing a Doorknob with No Visible Screws
Can't detect whatever visible screws on your doorknob?
Step 1: Locate the Slot
All knob locks have what's known as a slot with a latch; this is what holds the knob in place. Y'all can find the slot on the shank of the inside knob (the one you use to lock the door). This is usually a small, rectangular hole. If you don't encounter the pigsty, try turning the knob to either side until you can locate information technology.
Pace ii: Push button and Remove Knob
Now that you've located the slot, you'll need a flat-caput screwdriver (or a minor pin, paper clip, or nail) to press the release button within of the slot (these tend to exist very modest). Push your chosen tool into the hole and depress the button. At this indicate, the interior knob should release from the door easily.
Stride 3: Remove Exterior Rose Plate
Next, you'll demand to remove the rose plate. The best way to do this is to utilize a pocket-sized, apartment-caput screwdriver to carefully pry the rose plate away from the door. Normally, there is a minor slot on the rose plate that allows you to do this.
Step four: Remove Interior Rose Plate
Now that you've removed the decorative rose plate, the interior rose plate (with screws) should exist exposed. Pick upwards your Philips-head screwdriver over again and loosen these screws.
Pace 5: Unscrew the Face Plate
Motion on over to the faceplate now and unscrew that. Once completed, remove the latch birthday.
Step 6: Remove Remaining Doorknob
Finally, grab the remaining exterior doorknob and pull.
Read more near the Best Type of Lock for Your Door.
Removing a Cylinder Door Lock
Cylinder locks are extremely common and this type of lock is yet relatively unproblematic to remove. In but three quick steps, yous can remove an existing cylinder lock for re-keying or replacement.
Tools Needed
To remove a cylinder lock, you'll need just a few basic tools:
- Phillips-head screwdriver
- Flat-head screwdriver
- Allen wrench
Step i: Remove Screws
Start by using your Phillips-caput screwdriver to remove whatever visible screws from the interior side of the door. These are the screws that hold the lock and the door together.
Pace two: Remove the Spindle
Next, y'all'll need to utilise your apartment-head screwdriver to plow the spindle of the lock counter-clockwise effectually until it stops. This should be washed by inserting the apartment-head screwdriver (yous may demand to effort a few different sizes) into the lock itself.
One time the spindle stops turning, you lot should detect that the square tab within the spindle is perfectly aligned with the rest of the lock. At this point, you should be able to use your apartment-head screwdriver to carefully push button on the tab that's holding the spindle into place. When you lot do this, the spindle itself will pop out of its housing.
Stride three: Take the Cylinder Out
With the spindle gone, you'll now accept access to the housing of the lock. Look carefully inside the housing (a flashlight might be helpful here) until you locate another pocket-size tab. Employ your flat-caput screwdriver to button down on this tab, which will release the cylinder. Yet, there's a good chance that you'll need to use an Allen wrench to push on the cylinder until it slides or pops out.
Equally you work on removing the cylinder, exist conscientious not to press as well hard with the screwdriver on the tab, equally this can cause permanent impairment to the betoken that the lock will no longer be usable.
Removing a Mortise Lock
Mortise locks accept a pocket (called a mortise) that is cut into the door itself. The lock is encased in this pocket, making it a more secure locking method.
Tools Needed
Removing a mortise lock requires:
- Phillips-caput screwdriver
- Flat-head screwdriver
- A hammer may be needed
Stride 1: Locate & Unscrew the Set Spiral
This screw will be on the shank of the inside knob (the i y'all use to lock the door).
Step two: Unscrew the Door Handles
The 2 door handles are screwed into each other through the spindle. Be certain to unscrew them; do not just pull.
Step 3: Remove the Rose Plates
Unscrew the external doorknob rose plate that remains on the door using a Philips-caput screwdriver.
Step 4: Remove the Face Plate
Unscrew the top and bottom screws located on the faceplate of the mortise lock using a Phillips-head screwdriver.
Step 5: Remove the Mortise Lock
Using your hands or plyers, grab the latch bolt and brainstorm to pull the mortise lock out. It should come up out after a few, good pulls.
If the mortise lock can't be easily removed, catch a large apartment-head screwdriver and use that to pry it out. Insert the screwdriver into the hole where the spindle was. The screwdriver should fit snuggly in the hole. With your screwdriver perpendicular to the door, take a hammer and tap it in the management of the strike place a few times.
There you accept it: a few elementary steps to removing a knob door lock, a cylinder door lock, and a mortise lock at your home. This is a basic DIY skill that whatsoever homeowner will do good from knowing, especially if you ever need to replace a lock or have it re-keyed.
Become more skillful advice: How to Repair Electronic Locks.
Residential Locksmith Services
Of class, if you run into any troubles while trying to remove a lock at your home, experience free to contact Great Valley Lockshop at 484-324-2986 or fill out a service request for assistance.
Editor's Note: This post was originally published in February 2022 and has been completely updated for accuracy and comprehensiveness.
How To Remove Key Lock From Door,
Source: https://www.gvlock.com/blog/how-to-remove-a-door-lock-at-home/
Posted by: acostaficky2002.blogspot.com
0 Response to "How To Remove Key Lock From Door"
Post a Comment